Advance Prep: Machine set up for embroidery with the 4 x 4 inch hoop and Embroidery needle size 80/12 inserted.
When your kit arrives please cut the stabilizer before class to be about 2-inches larger than the hoop on all four sides.
Cut (5) Five 4” x 4” pieces of Sulky Solvy Stabilizer
Cut the following stabilizers about 2” bigger than your hoop on all four sides:
Cut 17 pieces of Sulky Tear Easy Stabilizer
Cut (3) three pieces of Soft ’n Sheer Stabilizer
Cut (3) three pieces of Totally Stable Stabilizer
Also, please wind a bobbin with the Sulky Bobbin thread that comes in your kit and thread the needle with Sulky rayon thread, also included in the kit.
Reminder: This class will have two sessions (Nov. 11th 10am-1pm and Nov. 18th 10am-1pm). The class fee includes both sessions, and the Zoom link that will be sent in the confirmation email will be used for both sessions.
Supply List: There is a kit required for this class that can be purchased for $45 by emailing the instructor at
Michelle@SewingMachineArtistry.com
Please be sure to purchase your kit 3 weeks prior to class to receive the kit in time. If you are ordering less than 3 weeks before class, you are welcome to join the class as scheduled and then embroider along with the recording once the kit has arrived.
You'll also need: Scissors, thread snips, Embroidery needle size 80/12, 70/10 or 80/12 Jersey or Ball Point needle and KK2000. A single-needle or multi-needle embroidery machine is required. A 4x4-inch hoop will be used for class.